Electrochemical detection of oxytetracycline employing sugarcane carbon modified graphite electrode.

The present study used CeO2-Co3O4 quantum dots@porous carbon/multiwalled carbon nanotube (CeO2-Co3O4 QDs@PC/MWCNT/GE) composites to modify graphite electrodes to fabricate high-sensitivity electrochemical sensors to detect the presence of oxytetracycline (OTC). The quantum dots were made from waste sugarcane bagasse. The electrochemical analysis demonstrated the superior electrochemical performance of CeO2-Co3O4 QDs@PC/MWCNT/GE, with a peak current density of 1.276 mA/cm2. Electrochemical impedance spectroscopy (EIS) revealed lower impedance values for CeO2-Co3O4 QDs@PC/MWCNT/GE compared to other electrodes, indicating enhanced conductivity. The modified electrode exhibited an enlarged electrochemically active area, with values of 0.602 cm2, almost seven times that of the bare graphite electrode (0.079 cm2). The results showed that the CeO2-Co3O4 QDs@PC/MWCNT/GE had excellent performance for OTC detection, and its linear calibration range was 1.007 × 10-8 to 2.04 × 10-7 M (i.e., 0.005-0.1 ppm) and 1.007 × 10-6 to 1.209 × 10-4 M (i.e., 0.5-60 ppm). The limit of detection and limit of quantification were 1.23 nM (0.61 ppb) and 4.09 nM (2.03 ppb) (S/N = 3), respectively. The electrode demonstrated long-term stability for up to 7 weeks. This method provides a new way to prepare electrochemical sensors for OTC detection.

Nano Modification of Antrodia Cinnamomea Exhibits Anti-Inflammatory Action and Improves the Migratory Potential of Myogenic Progenitors.

The skeletal muscle progenitors' proliferation and migration are crucial stages of myogenesis. Identifying drug candidates that contribute to myogenesis can have a positive impact on atrophying muscle. The purpose of the study is to synthesize the Antrodia cinnamomea (AC)-ß-cyclodextrin (BCD) inclusion complex (IC) and understand its in vitro pro-regenerative influence in murine skeletal C2C12 myoblasts. The IC was subjected to various nano-characterization studies. Fluorescent IC was synthesized to understand the cellular uptake of IC. Furthermore, 25 µg/mL, 12.5 µg/mL, and 6.25 µg/mL of IC were tested on murine C2C12 skeletal muscle cells for their anti-inflammatory, pro-migratory, and pro-proliferative action. The cellular internalization of IC occurred rapidly via pinocytosis. IC (252.6 ± 3.2 nm size and -37.24 ± 1.55 surface charge) exhibited anti-inflammatory action by suppressing the secretion of interleukin-6 and enhanced cell proliferation with promising cytocompatibility. A 12.5 µg/mL dose of IC promoted cell migration in 24 h, but the same dose of AC significantly reduced cell migration, suggesting modification by BCD. Molecular studies revealed that IC promoted C2C12 myoblasts migration by upregulating long non-coding RNA (lncRNA) NEAT-1, SYISL, and activating the pPKC/ß-catenin pathway. Our study is the first report on the pro-proliferative and pro-migratory effects of BCD-modified extracts of AC.

Food waste and soybean curd residue composting by black soldier fly.

This study attempted to manage the food waste and soybean curd residue generated in Taiwan's National Ilan University by black soldier fly-aided co-composting. The food waste and soybean curd residue were co-composted with rice husk as a bulking agent in 4:1 ratio and 0.42 mg BSF/g waste. The higher organic matter degradation of 31.9% was found in Container B (black soldier flies aided food waste and rice husk co-composting) with a rate constant of 0.14 d-1. In Container D (black soldier flies aided soybean curd residue and rice husk co-composting), the organic matter degradation of 29.4% was found with a rate constant of 0.29 d-1. The matured compost of 6.02 kg was obtained from 20 kg of food waste, while 5.83 kg of matured compost was generated from 20 kg of soybean curd residue. The physico-chemical parameters of the final matured compost were in the favorable range of Taiwan's compost standards. The germination index was 188.6% and 194.78% in Containers B and D, respectively. The present study will expand the application of BSF at the institutional level which prove to be a feasible solution for rapid, clean, and efficient composting of post-consumer food wastes.

Influence of Alkalinization Over Metal Organic Frameworks MIL-100(Fe) for Enhanced Volatile Organic Compounds (VOCs) Adsorbents.

Substantial attempts have been undertaken for the improvement of the air quality over decades; and Volatile Organic Compounds (VOCs) from the chemical and textile industries are truly listed as severe issue to be controlled. To come up with modus operandi for this issue, a novel composite of metal organic frameworks (MOFs) MIL-100(Fe) with salient tuned features of natrite was designed by a green and facile method. Mineralized composite MOFs exhibited enhanced crystallinity than pure MIL-100(Fe) as well showcased a higher surface area of 1300 m² g-1. Through dynamic acetone pressure swing adsorption setup, MIL-0.05Na (MIL-100(Fe) synthesized with 0.05 mM Na2CO3 solution) revealed an enhanced acetone adsorption of 210 mg g 1 at room temperature. Gas phase adsorption isotherms confirmed the mono layer adsorption behavior. The kinetics models evaluated that the external mass transfer was the rate limiting step for surface adsorption. The thermodynamic study manifested that the adsorption reaction was spontaneous and exothermic. The proposed mechanism of adsorption was the act of physisorption which enriched the adsorbents reusability. This research work provides a futuristic vista to design mineralized Fe-MOFs composites for an energy saving adsorbents for VOCs removal.

Adsorption Configurations of Iron Complexes on As(III) Adsorption Over Sludge Biochar Surface.

Waste recycling and reuse will result in significant material and energy savings. In this research, usage of hospital sludge as a biochar adsorbent for wastewater treatment plants was investigated. Microwave carbonization was used to carbonize the sludge and then chemically activated with ZnCl2to increase surface area and porosity. A newly designed iron metal doped sludge biochar carbon (SBC) has effective adsorption of inorganic arsenic (As(III), As2O3) in water. The findings clearly demonstrate the viability and utility of using hospital sludge as a source of carbon to generate SBC. The adsorption mechanism of As(III) on SBC's iron-metal-modified surface has been studied using density functional theory (DFT) to understand the impact of functional complexes on adsorption As(III). Tests showed physical as well as chemical adsorption of As(III) on Fe-SBC surface. Fe's involvement in functional complexes greatly fostered SBC surface activity and it's As(III) adsorption ability. The physical adsorption energies of As(III) with Fe functional complexes on the SBC surface were -42.3 KJ mol-1. Other hand, the chemical adsorption energies of As(III) on Fe-SBC surface was -325.5 KJ mol-1. As(III) is capable of interacting in a bidentate fashion with the dopants through the protonated oxygen atoms and this conformation of the cyclic structure is higher in the adsorption energy than the others.

Aqueous Oxytetracycline and Norfloxacin Sonocatalytic Degradation in the Presence of Peroxydisulfate with Multilayer Sheet-Like Zinc Oxide.

Multilayer ZnO sheet-like flakes were synthesized by a simple method of precipitation and characterized by the techniques of X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The findings are proven that the SEM images show the overall morphology of a single sheet-like ZnO nanostructure made from uniformly thick nano-sheets. In an aqueous environment, the acoustic ability of the prepared material was assessed using ultrasound (US) radiation to degrade oxytetracycline (OTC) and norfloxacin (NF). To increase the degradation efficiency, a US/ZnO/peroxodisulfate system was developed by introducing ammonium persulfate ((NH4)2S2O8) and sodium persulfate (Na2S2O8), exhibiting excellent synergistic effects. Result show the decomposition efficiency for NF removal with Na2S2O8 (64%) appeared to be slightly better than with (NH4)2S2O8 (56%). By contrast, the ultrasonic catalytic efficiency of Na2S2O8 (98%) was slightly better than that of (NH4)2S2O8 (94%) for OTC removal. The addition of scavengers to the US/ZnO/peroxodisulfate system through the NF and OTC results in the largest effect of holes. The degradation is considered to be often caused by holes. In this system, the Na2S2O8 can have two roles to increase the rate of degradation: (1) The SO4- formed by Na2S2O8 under ultrasonic irradiation directly degraded to norfloxacin on ZnO surface; and (2) S2O82- behaved as an electron acceptor, inhibiting recombination of electron hole pairs, enabling the development of more ·OH. Therefore, the synergistic effect significantly increases US/ZnO/peroxodisulfate sonocatalytic activity (Hu, S.B., et al., 2017. Aqueous norfloxacin sonocatalytic degradation with multilayer flower-like ZnO in the presence of peroxydisulfate. Ultrasonics Sonochemistry, 38(1), pp.446-454).

Augmentation of Photocatalytic Degradation of Oxytetracycline by Cu-CdS and Deciphering the Contribution of Reactive Oxygen Species.

Production of Copper (Cu) modified Cadmium sulfide (CdS) nanomaterial, named as Cu-CdS, was successfully synthesized through hydrothermal and photo deposition method to degrade oxytetracycline (OTC) antibiotics in aqueous solution. Uniform surface loading of copper was observed on CdS using Scanning Electron Microscopy-mapping (SEM-mapping). The Cu induced improvement in the visible light absorption was observed using UV-vis absorption spectrum. Thus, this material can exhibit excellent oxytetracycline (OTC) degradation by photocatalysis. The best OTC degradation efficiency of 90% was be achieved under the optimal concentration of 4% Cu-CdS, with 0.1 g L-1 dosage (pH 5) under UV irradiation. 0.167 mg L-1 min-1 was observed as the reaction kL-H on the peripheral of the catalyst. In addition, OTC can also be degraded under visible light with removal efficiency approximately 90%. Moreover, the contribution of main reactive oxygen species (ROS), including hydroxyl radicals, superoxide radical and holes, is evaluated as 18%, 43% and 29%.

Innovative spherical biochar for pharmaceutical removal from water: Insight into adsorption mechanism.

In this study, we developed an innovative spherical biochar with high porosity and excellent paracetamol (PRC) adsorption capacity. The optimal pyrolysis temperatures for the preparation of spherical biochar (derived from pure glucose) and non-spherical biochar (from pomelo peel wastes) were obtained at 900 °C and 700 °C, respectively. Various advanced techniques were applied to characterize the prepared biochars. Spherical and non-spherical biochars exhibited large specific surface area (1292 and 1033 m2/g) and high total pore volume (0.704 and 1.074 cm3/g), respectively. The adsorption behavior of PRC onto two biochars was conducted utilizing batch experiments. Results demonstrated that the adsorption process was slightly affected by the change of solution pH (2-11) and addition of NaCl (0.05-1.0 M) and was able to achieve fast equilibrium (∼120 min). The maximum adsorption capacity of spherical biochar (286 mg/g) for PRC was approximately double that of non-spherical biochar (147 mg/g). The signal of thermodynamic parameters was negative ΔG° and ΔH° values, but positive ΔS° value. The adsorption mechanism consisted of pore-filling, hydrogen bonding formations, n-π and π-π interactions, and van der Waals force. The adsorption capacities of two biochars were insignificantly dependent on different real water samples containing PRC. Consequently, the biochars can serve as a green and promising material for efficiently removing PRC from water.

Preparation of Pt/TiO2/Graphene/Polyethylene Sheets via a Facile Molding Process for Azo Dye Electrodegradation.

As the characterizations of electrode are meaningful for electric catalytic efficiency and mechanism, the improvement of electrode have raised considerable public concern in recent decades. However, the metal electrode have the drawbacks of high price and easy for toxicity, nano electrode restricted by difficulties for electrode coating, possibility of agglomeration, and abscission during reactions. Focus on those defects, the proposed study is going to establish a useful technique for polymer combined nano-electrode preparation. The morphology, functional groups, and other characterization of the Pt/TiO2/graphene particles and organic composite nano Pt/TiO2/graphene sheets were analyzed by transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), electrochemical impedance spectroscopy (EIS). To identify the stability of self-prepared electrodes, parameters such as catalysts dosage, current density and pH will be analyzed by using RBK5 as target pollutions. The results shows that after treatment for 50 min under optimized conditions (20 mA, 1 g/L NaCl), the degradation rate of acetaminophen almost reached 100%. After five times recycle, the self-prepared electrode could still maintained a high removal rate of 90%.

Preparation of Graphene Oxide Modified Rice Husk for Cr(VI) Removal.

The objective of this paper is to study the removal of Cr(VI) in aqueous solution by using a new graphene oxide-coated rice husk biochar composite (GO-RHB). GO-RHB is a synthetic material having a porous structure with lots of oxygen-containing functional groups and a large surface area that provide effective adsorption sites. Experiments showed that GO-RHB had higher adsorption capacity under acidic than under alkaline conditions. At pH of 2, GO-RHB has the maximum adsorption capacity(48.8 mg g-1). Equilibrium data obtained by fitting with the Langmuir and Freundlich models indicate that the reaction process was monolayer adsorption. The adsorption of Cr(VI) followed the pseudo-second-order kinetic model that illustrates chemical adsorption. Intraparticlediffusion studies further revealed that film diffusion was taking place. Moreover, the results of thermodynamics showed that the adsorption process was endothermic and spontaneous in nature. The removal mechanism of Cr(VI) was also explained in detail. The prepared adsorbent is highly efficient and might be useful than many other conventional adsorbent used for the removal of Cr(VI) from wastewater.

Electrochemical Oxidation of Azo Dye Wastewater Using Graphene-Based Electrode Materials.

Composite electrodes with different graphene (GN)/TiO² ratios and nano-activated carbon electrodes were prepared for electrocatalytic performance comparison. The electrodes were loaded with platinum (Pt) by use of chloroplatinic acid to promote their performance. Reactive Black 5 (RBk5) dye wastewater was treated as a challenging pollutant by use of advanced electrochemical oxidation technology. The composite materials were characterized by Transmission Electron Microscope (TEM), Field Emission Scanning Electron Microscopy (FE-SEM), and Energy Disperse Spectroscopy (EDS). Results showed that the graphene electrode was prepared successfully and verified because all elements were uniformly loaded on the conductive carbon cloth. The effects of several operating parameters including material types, pH, initial concentration of RBk5, and current density on the removal performance of RBk5 were also assessed. The supporting electrolyte was NaCl solution of 1 g L-1. The concentration of RBk5 was detected using an ultraviolet spectrophotometer with a detection wavelength of 600 nm. The optimum parameters of the experiment were GN/TiO2 ratio of 1:4 and pH of 6.6. The removal efficiency of RBk5 could be higher than 95% under an initial concentration of RBk5 of 5 ppm and a current density of 2.5 mA·cm-2 when reaction time was 30 min.

Deciphering the Adsorption Behavior of Volatile Organic Compounds with Electrospun Polyacrylonitrile/Molecular Sieve Nanocomposites.

In this study, a new type of molecular sieve/polyacrylonitrile fiber (M-PAN) was prepared by electrospinning to adsorb atmospheric volatile organic compounds (VOCs). The suitable content of molecular sieve in nanocomposites was also determined for achieving maximum VOCs adsorption capacity. SEM, TEM and N2 adsorption/desorption analyzer were performed for characterization of the surface morphology, structural properties, surface area and pore size. A part of molecular sieve is exposed on the fiber surface where VOCs can be adsorbed efficiently in a short time. Acetone was used as a challenge pollutant to evaluate the adsorption of VOCs at different recycling times and types of electrospinning nanofibers. The adsorption capacity of 6M-PAN (60% weight of molecular sieve) nanofiber reached 58.2 µg g-1 and the reused nanofibers nearly had the same adsorption capacity as the newly prepared nanofibers after several times of recirculation.

Preparation of Zn-Doped Amino Functionalized Biochar from Hazardous Waste for Arsenic Removal.

The utilization of sludge from Far Eastern Memorial hospital (New Taipei city, Taiwan) wastewater treatment plants as biochar adsorbent was investigated. The sludge was carbonized using microwave carbonization and then chemically activated at high temperatures by using ZnCl2 to enhance porosity and surface area. A newly designed Zndoped amino-functionalized sludge biochar (Zn-SBC-DETA) presents effective As adsorption in water. The adsorbent was characterized by nitrogen adsorption-desorption, scanning electron microscopy (SEM) and thermogravimetric analysis. Results show that the surface area and average pore volume of Zn-SBC-DETA are 525 m² g-1 and 0.35 cm³ g-1, respectively. SEM results reveal that Zn-SBC-DETA has uniform pore size. The highest adsorption efficiency of As(III) is 79% at pH 3 with an adsorption capacity of 0.84 mg g-1. In addition, the adsorption efficiency of As(V) is 98% at pH 3 with an adsorption capacity of 1.43 mg g-1. The adsorption data can be described well by the Langmuir model rather than by the Freundlich model The data show good compliance with the pseudo second-order equation, and the correlation coefficient for the linear plots is higher than 0.97. Combined with the As species after reacting with Zn-SBC-DETA, the As transformation and adsorption mechanism are also discussed.

Preparation of Fe-SBC from Urban Sludge for Organic and Inorganic Arsenic Removal.

In the process of water treatment adsorption has been proved to be the best, because of its significant advantages. It is recognized that recycling and reuse of waste can result in significant savings in materials cost. In this research, the adsorption of organic and inorganic arsenic using sludge biochar (SBC) made from urban sludge were analyzed. The sludge was carbonized using calciner carbonization and then chemically activated at high temperatures and a newly designed Fe-doped sludge biochar (Fe-SBC) presents effective As adsorption in water. Results show that the surface area and average pore volume of Fe-SBC are 498 m² g-1 and 0.33 cm³ g-1, respectively. The adsorption capacity of p-ASA, As(V) and As(III) on Fe-SBC was calculated as 5.47, 3.83 and 3.24 mg L-1, respectively. The adsorption capacity of As were obviously decreased in presence of PO3-4. After six times recycles of adsorption-desorption processes, the adsorption capacity of p-ASA, As(V) and As(III) on Fe-SBC obvious reduction.

Preparation and Photocatalytic Hydrogen Production of Pt-Graphene/TiO2 Composites from Water Splitting.

Hydrogen is considered as a promising energy source with its high energy yield, renewable, environment friendly properties. TiO2 modified with noble metal and nonmetal is widely used. In this study, Pt and graphene (GN) were used to modify TiO2 nanoparticles. GN/TiO2 (TG), Pt-TiO2 (PT), Pt-GN/TiO2 (PTG) was successfully synthesized by modified Hummers' method, alcohol thermal and photodeposition method, respectively. The characterizations of the synthesized catalysts by UV-vis/DRS, components analysis, XRD and TEM analysis were conducted. Results showed the maximum hydrogen production rate was approximately 4.71 mmol h-1 g-1 when the Pt content was 1.0 wt.%. Higher and lower than 1.0 wt.% of Pt loading content both result in low efficiency of hydrogen production. The situation of graphene is similar to Pt. The optimal ratio for grapheme is 10 wt.%. The highest hydrogen production rate is 6.58 mmol h-1 g-1 by 1.5 wt.% Pt-5 wt.% GN/TiO2 (1.5PTG5), which is about 1.4 and 2.2 times higher than that of Pt-TiO2 and GN/TiO2 binary composites, respectively. The utilization of low-cost graphene can reduce the use of noble metal Pt in photocatalytic hydrogen production. The mechanism of Pt-GN/TiO2 for the improved photocatalytic activity is proposed. 0.1 g L-1 is found to be the optimum catalyst concentration for optimal hydrogen production.

Preparation of Zn-Doped Biochar from Sewage Sludge for Chromium Ion Removal.

Recycling and reuse waste can result in significant savings in materials and energy. In this study, the adsorption of Cr(VI) was analyzed using activated carbon (AC) and biochar (BSC) made from sewage sludge. BSC materials were synthesized using zinc chloride as an activator coupled with carbonized sewage sludge. Specific surface area, pore size distribution, and pore volume were determined by measuring nitrogen adsorption-desorption (BET). BSC morphology was measured using field-emission scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS). Results showed that the surface area and average pore volume of the BSC were 490 m2 g-1 and 0.8 cm3 g-1, respectively. SEM results revealed that BSC had uniform pore size. Effects of varying the initial Cr(VI) concentrations, pH values, and dosages of BSC on adsorption performance were also determined. Results showed that the maximum removal efficiency of Cr(VI) was above 99%, and adsorption capacity of 50% ZnCl2-BSC was 677 mg g-1.

Triangular Silver Nanoplate-Coated ZnO Nanoflowers Photocatalysis of Norfloxacin Under Visible Light.

T-Ag/ZnO nanoflowers were successfully fabricated via two steps methods on zinc foil. The chemical composition of norfloxacin was investigated by FTIR spectroscopy. The morphology, composition, and structural and optical properties of the as-synthesized materials were characterized. The results show that triangular silver nanoplates exhibit unique surface plasmon resonance (SPR) absorption spectra, and the absorption spectrum range of ZnO nanoflowers are effectively expanded by coating triangular silver nanoplates. The photocatalytic degradation of norfloxacin activity can be obviously improved because of a synergetic effect and unique SPR of triangular silver nanoplates in the T-Ag/ZnO nanoflowers under visible light. In addition, the possible mechanism for T-Ag/ZnO nanoflowers for the photodegradation of norfloxacin are discussed. The stability of T-Ag/ZnO nanoflowers are also studied.

Hexamethyldisilazane Removal with Mesoporous Materials Prepared from Calcium Fluoride Sludge.

A large amount of calcium fluoride sludge is generated by the semiconductor industry every year. It also requires a high amount of fuel consumption using rotor concentrators and thermal oxidizers to treat VOCs. The mesoporous adsorbent prepared by calcium fluoride sludge was used for VOCs treatment. The semiconductor industry employs HMDS to promote the adhesion of photo-resistant material to oxide(s) due to the formation of silicon dioxide, which blocks porous adsorbents. The adsorption of HMDS (Hexamethyldisiloxane) was tested with mesoporous silica materials synthesized from calcium fluoride (CF-MCM). The resulting samples were characterized by XRD, XRF, FTIR, N2-adsorption-desorption techniques. The prepared samples possessed high specific surface area, large pore volume and large pore diameter. The crystal patterns of CF-MCM were similar with Mobil composite matter (MCM-41) from TEM image. The adsorption capacity of HMDS with CF-MCM was 40 and 80 mg g-1, respectively, under 100 and 500 ppm HMDS. The effects of operation parameters, such as contact time and mixture concentration, on the performance of CF-MCM were also discussed in this study.

Effects of Different Sacrificial Agents and Hydrogen Production from Wastewater by Pt-Graphene/TiO2.

The Pt and graphene (GN) were used to modify TiO2 nanoparticles. GN/TiO2, Pt-TiO2, Pt-GN/TiO2 were successfully synthesized by modified Hummers' method, alcohol thermal and photodeposition method, respectively. The characterizations of the synthesized catalysts by different characterization techniques, including N2 adsorption-desorption isotherm, fourier transform infrared spectroscopy (FTIR), inductively coupled plasma (ICP) technique and element analyzer (EA), respectively. In addition, different sacrificial agents (methanol, ethanol, n-propanol, i-propanol, n-butanol, ethylene glycol, 1,2-propanediol, 1,3-propanediol and glycerol) have been investigated. There is clearly a linear relationship between hydrogen production rate and the polarity of monohydric alcohols. According to the Langmuir-Hinshelwood results, the surface pseudo-first order rate constant k = 15.06 mmol h-1 g-1 and the adsorption coefficient k = 0.50 mol L-1 were obtained. The feasibility of hydrogen production from wastewater obtained from terephthalic acid industry was studied. After reusing the catalyst under the same experimental conditions, the hydrogen production rate has only slightly decreased for 3 more cycles, which indicated the stability of the synthesized catalysts.

Photocatalytic Degradation of Oxytetracycline by Ternary Mixed Catalyst and Toxicity Assessment Using Boar Sperm.

Response surface methodology was adopted to obtain ternary mixed catalysts of TiO2-loaded ZSM-5 zeolite and graphene. Oxytetracycline was used as challenged toxicant to evaluate the photocatalytic degradation efficiency of the composites. The optimal weight ratio of graphene, TiO2, and ZSM-5 was 1:8:1. The composites were characterized by ultraviolet-visible spectroscopy, X-ray diffraction, fourier transform infrared, N2 adsorption-desorption isotherms, and transmission electron microscope with an energy-dispersive spectroscopy system, etc. Synthesized samples showed high stability and strong visible-light absorption efficiency. The optimal operating conditions of oxytetracycline photocatalytic degradation were achieved over a wide range of pH and temperature. With 0.1 g/L of optimal ternary mixed composite, the photocatalytic degradation of oxytetracycline was nearly reached completion within 150 min at all treatment temperatures at pH 7. Toxicity of degraded oxytetracycline solution was assayed by a boar sperm quality model using fluorescent staining and flow cytometry. During 180 min of photocatalytic treatment, the degraded oxytetracycline solution showed increasing biotoxicity and changed the morphology and function of boar sperm, despite not killing them.